Tough All-Rounder Paint
Paint
This paint is available in 5 different colours: White, Black, Dark Grey, Chrome Green and Venetian Red. A colour for every taste. Because of our technology and quality materials our colour last longer and looks more vibrant.
Container
The reusable container is specifically chosen for its second hand household value in order to actively reduce pollution and save the planet. Furthermore is the unique rectangular shape big enough to fit a roller, and a spillage prevention gap decreases spills. The clear container allow you to see the paint colour, and increases its reuse value.
Features
Uses
It is important to get the surface clean and dry
Remove dirt, leaves and other debris
Loose, flaking paint must be removed
If the service needs to be waterproof - Inspect the entire surface for any open seams, tears, cuts,etc. and fix it with ToughSealer™
On all absorbent surfaces thin down first coat up to 20% with water
ToughRoof™ will adhere to most surfaces without a primer;
It can be directly applied to cement, galvanize roofing, concrete, wall boards/ceilings
PVC/Wood: Use a suitable primer
Ferrous surfaces: Remove rust on surface and prime with suitable primer
Chalky surfaces must be primed with bonding liquid
For all oil painted surfaces use universal undercoat after surfaces have been cleaned
Preferably two coats are required.
ToughRoof™ must be stirred properly
Allow the first coat to dry for at least 3 hours.
Coverage rate may decrease on textured surfaces, and more coating will likely be used on first coat than on additional coats.
Do not apply in temperatures below 10°C, above 35°C, if rain is expected within 2 hours or Humidity above 80%.
Ensure your paint is applied smoothly as ToughRoof™ is designed to give a smooth finish so that dirt can wash off
Use with brush, roller or airless spray
Areas of algae, mildew or fungus should be treated with a solution of 1 part household bleach and 3 parts water, followed by a powerwash rinse using clear water.
Application tools and equipment can be cleaned with water
Roofs become slippery when wet. Use extreme caution.
Store away from direct sunlight, heat and severe cold
Use containers with the same batch numbers for large areas
Type: Pure Acrylic Emulsion (adhesion promoted)
Drying time (depending on temperature):
Surface Dry: 30 min-1 hours
Totally cured: 3-4 hours
Recoating time: 4 hours
Application temperature: 5-35°C
Viscosity: 100 – 110 Krebs Unit
Relative density: 1.24 – 1.40
Solids by Volume: 28-33%
Spread rate: 5 – 8m²/litre (depending on surface)
Gloss Level: Sheen Finish