Tough Rubber Seal
Paint
This paint is available in 5 different colours: White, Black, Dark Grey, Chrome Green and Venetian Red. A colour for every taste. Because of our technology and quality materials our colour last longer and looks more vibrant.
Container
The reusable container is specifically chosen for its second hand household value in order to actively reduce pollution and save the planet. Furthermore is the unique rectangular shape big enough to fit a roller, and a spillage prevention gap decreases spills. The clear container allow you to see the paint colour, and increases its reuse value.
Features
Uses
It is extremely important to get the surface clean and dry
Remove dirt, leaves and other debris
Inspect the entire surface for any open seams, tears, cuts, etc. and fix it with ToughSealer™ and a flexible, reinforcing membrane
Pressure wash roof with water and allow to dry completely.
ToughSealer™ will adhere to most surfaces without a primer;
It can be directly applied to cement, galvanize and concrete.
If ToughSealer™ is used on old paint use a primer to prepare the surface.
Preferably two coats are required.
It is recommended to paint ToughRoof™ over ToughSealer™ for longer lasting results
On all absorbent surfaces, thin down first coat with up to 20% water
Chalky surfaces must be primed with bonding liquid
ToughSealer™ must be stirred properly
Allow the first coat to dry for at least 3 hours.
Apply second coat as soon as the first coat can be safely walked on.
Coverage rate may decrease on textured surfaces, and more coating will likely be used on first coat than on additional coats.
Do not apply in temperatures below 10°C, above 35°C, if rain is expected within 2 hours or Humidity above 85%.
Do not walk on ToughSealer™ other than for periodic maintenance
Ensure your paint is applied smoothly as ToughSealer™ is designed to give a smooth finish so that dirt can wash off
Areas of algae, mildew or fungus should be treated with a solution of 1 part household bleach and 3 parts water, followed by a powerwash rinse using clear water.
Application tools and equipment can be cleaned with 100% pure mineral spirits.
Once a container of ToughSealer™ is opened, the curing process has started. Use the entire product on your project if possible.
Roof structures may settle over time. A periodic inspection of your roof, which includes transition areas, flashing, vents and skylights, is recommended. Keep drains cleared at all times.
Roofs become slippery when wet. Use extreme caution.
An old, neglected, or failing roof does not have the resilience to withstand the rigors of weather.
ToughSealer™ may not be suitable for such a roof. If you are in doubt about the condition of your roof, consult a qualified roof inspector.
Store away from direct sunlight, heat and severe cold
Use containers with the same batch numbers for large areas
- Type: Pure Acrylic Emulsion
Drying time:
Surface Dry: 1-3 hours (depending on temperature)
Totally cured: 75-120 hours (depending on temperature)
Tensile strength: 2 MPa
Application temperature: 5-35°C
Flexibility: 100%
Spreading rate: 3-5 m²/litre (depending on surface)
Gloss Level: Sheen Finish